ALEXANDER ENGEL KG - engel modellbau -/- R/C -/Speed Controllers/ESC brushed products

Rokraft 50 æP 4.8-8.4V 34,98 €

Tue, 27 Feb 2024 23:27:44 +0100

A miniature speed controller for small models and auxiliary working systems.

The expanded zero point, non-linear control curve and high pulse frequency provide ultra-fine speed control.

In spite of its small size this controller features comprehensive protective functions.

Full forward-reverse control.

Technical Specifications:
Operating voltage: 4 - 7 NC (BEC) Volts
Weight: 14 g
Momentary: 7.00 A
Connector system: Futaba 2.8 mm Faston
Dimensions: 40 x 28 x 8 mm
Functions: Forward, stop, reverse
Features: BEC, hec, eps, TP, POR, WP, Rx filter

Speed Profi 40R 7.2-12V 53,90 €

Wed, 09 Aug 2023 11:52:07 +0200

This controller is suitable for brushed motors with 12 winds or more, and offers fine speed control over the range forward, brake and reverse. The controller automatically adjusts itself to suit your radio control system when switched on, and therefore requires no programming of any kind.

• Automatically sets itself up to suit your transmitter
• High pulse frequency
• Forward, ABS brake, reverse
• Delay interval for reverse running
• Overheating guard
• On-/Off switch cord

Technical Specifications:
Operating voltage: 7.2 ... 12 V
Cell count: 6 ... 10 NiCd, NiMH
Peak current: 200 A
Cont. current, forward: 40 A
Pulse frequency: 1 kHz
BEC: 5 V / 1 A
BEC current, peak: 1.5 A
Dimensions approx.: 41.6 x 38.2 x 16.3 mm
Weight approx. 65 g

Rookie 25 TAM 6-12V 41,99 €

Fri, 19 Apr 2024 10:10:49 +0200

Electronic speed controllers for model boats and cars with standard 540 motors and tuned motors up to 15 winds.
Features full reverse mode and dynamic brake.
Micro-processor controlled, with high motor pulse frequency.
Special arrangement of dynamic brake and reverse stage avoids premature gearbox wear.

Technical Features:
• Forward - stop - dynamic brake - reverse
• Fine, proportional speed control
• High motor pulse frequency (hec)
• Fine control at start-up
• High-flex silicone cables
• High-capacity BEC power supply
• Zero-wear output stage
• Overheating guard (TP)
• POR - power-on guard
• PCO - low voltage cut-off
• RX filter - switches off the controller if transmitter signal fails or is invalid
• Acrylic lacquer seal for splashproofing (WP)

Ultra-simple programming of the ranges forward, stop, dynamic brake and reverse. Just one input button and LED monitor.

Technical Specifications:
Operating voltage 6-12 Volts
Cont. current 25 A (2200 mAh)
Momentary 30 A
BEC 5V. 1.2A
Connector system 1.5 sqmm
Dimensions 46x37x25 mm
Weight approx. 60 g

Rookie 35 TAM 6-12V 52,99 €

Tue, 25 Jun 2024 11:56:45 +0200

Electronic speed controllers for model boats and cars with standard 540/550/600 motors as well as tuned motors at least 12 winds.
Features full reverse mode and dynamic brake.
Micro-processor controlled, with high motor pulse frequency.
Suitable for standard and upgrade motors.
Special arrangement of dynamic brake and reverse stage avoids premature gearbox wear.

Technical Features:
• Forward - stop - dynamic brake - reverse
• Fine, proportional speed control
• High motor pulse frequency (hec)
• Fine control at start-up
• High-flex silicone cables
• High-capacity BEC power supply
• Zero-wear output stage
• Overheating guard (TP)
• POR - power-on guard
• PCO - low voltage cut-off
• RX filter - switches off the controller if transmitter signal fails or is invalid
• Acrylic lacquer seal for splashproofing (WP)

Ultra-simple programming of the ranges forward, stop, dynamic brake and reverse. Just one input button and LED monitor.

Technical Specifications:
Operating voltage 6-12 Volts
Cont. current 35 A
Momentary 40 A
BEC 5V. 1.2A
Connector system 2.5 sqmm
Dimensions 46x37x25 mm
Weight approx. 65 g

Rookie 20 TAM 6-12V 38,98 €

Wed, 03 Jul 2024 16:29:05 +0200

Electronic speed controllers for model boats and cars with standard 540 (or smaller) motors and tuned motors up to 16 winds.
Features full reverse mode and dynamic brake.
Micro-processor controlled, with high motor pulse frequency.
Special arrangement of dynamic brake and reverse stage avoids premature gearbox wear.

Technical Features:
• Forward - stop - dynamic brake - reverse
• Fine, proportional speed control
• High motor pulse frequency (hec)
• Fine control at start-up
• High-flex silicone cables
• High-capacity BEC power supply
• Zero-wear output stage
• Overheating guard (TP)
• POR - power-on guard
• PCO - low voltage cut-off
• RX filter - switches off the controller if transmitter signal fails or is invalid
• Acrylic lacquer seal for splashproofing (WP)

Ultra-simple programming of the ranges forward, stop, dynamic brake and reverse. Just one input button and LED monitor.

Technical Specifications:
Operating voltage 6-12 Volts
Cont. current 20 A (2200 mAh)
Momentary 25 A
BEC 5V. 1.2A
Connector system 1.5 sqmm
Dimensions 46x37x25 mm
Weight approx. 60 g

Rokraft 100 µP 6-12V 62,99 €

Sat, 10 Feb 2024 09:50:14 +0100

Rokraft µP
A new generation of low-cost electronic speed controllers with full-range reverse stage. Micro-processor controlled, with high motor pulse frequency, fine for standard and "hot" motors. Special arrangement of dynamic brake and reverse stage avoids premature gearbox damage.

Highly reliable speed controller for motors of moderate to fairly high power. For example, 540 "tuning" motors with 17 - 36 turns, such as 550 or 600 and 700 Power motors. Acrylic lacquer seal for protection against splash damage.

Ideal for all ENGEL subs with 1 or 2 motors.

Features:
• Fine proportional control
• High motor pulse frequency (hec)
• Fine control at start-up
• High-flex silicone cables
• Heavy-duty BEC power supply*
• Zero-wear output stage
• Excess temperature protection (TP)
• POR - power on protection
• PCO - low voltage power-off
• Rx filter - switches controller off if transmitter signal fails or is invalid
• Acrylic lacquer seal for protection against splash damage
• Ultra-simple programming of the ranges forward, stop, dynamic brake and reverse
• Only one input button and LED indicator

Specifications:
Operating voltage: 5 - 10 NC Volts
Momentary: 20.00 A
Dimensions: 55 x 41 x 13 mm
Weight: 50 g
Connector system: JST / TAM
BEC: 5 V, 1.2 A*

Further specifications:
Operating voltage: 5 - 10 NC with BEC (or 6-12 V lead/acid batt.)
Functions: Forward, stop, dyn. brake, reverse
Features: BEC, hec, eps, TP, POR, PCO, WP, Rx filter

ROBUST 7.2-18V 39,80 €

Fri, 15 Sep 2023 21:13:08 +0200

Very robust, easy to handle electronic speed controller.

Dimensions:	14 x 27 x 50 mm
Weight:	14,6 g
Operational voltage:	7.2 - 18 V
Nominal current:	9 A , current limitation at 40A ( 0.038 Ohm)
Output signal:	variable clock rate (Sigma-Delta-Modulation) max.900Hz

Rookie 20 TAM 6-12V 79,95 €

Tue, 12 Dec 2023 14:08:35 +0100